Sapphire Plug-ins for AVX2: LensFlare

S_LensFlare

Renders a lens flare image over the background clip, aligning various flare elements between the hotspot and pivot locations. Use the Lens menu to select different types of lensflares.

In the Sapphire Lighting category.


Inputs:

Source: The current track. The clip to apply the lens flare over.

Occlusion: Optional. Obscures and colorizes the flare. The brightness of the flare is reduced based on the opacity of this clip, and the color at the hotspot location is used to tin the flare . These behaviors can be adjusted with the Occlusion Softness, Occlusion From, Invert Occlusion, and Use Color parameters.

Background: Optional. Composites the Source and lens flare over this clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Lens: Default: 0, Range: 0 or greater.
The type of lens flare to apply. Custom lens flare types can also be made, or existing types modified, by editing the flare in the flare designer.

Mocha: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.

Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.

Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.

Shift Mocha: X & Y,   Default: [0 0], Range: any.
Offsets the position of the Mocha Mask.

Bypass Mocha: Check-box,  Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.

Show Mocha Only: Check-box,  Default: off.
Bypass the effect and show the Mocha Mask itself.

Combine Masks: Popup menu,  Default: Union .
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
Union: Uses the area covered by both masks together.
Intersect: Uses the area that overlaps between the two masks.
Mocha Only: Ignore the Input Mask and only use the Mocha Mask.

Scale Widths: Default: 1, Range: 0 or greater.
Scales the sizes of all the flare elements. This parameter can be adjusted using the Scale Widths Widget.

Rel Heights: Default: 1, Range: 0 or greater.
Scales the vertical dimension of all the flare elements, making them elliptical instead of circular.

Rays Rotate: Default: 0, Range: any.
Rotates the ray elements of the lens flare, if any, in counter-clockwise degrees. This parameter can be adjusted using the Rays Rotate Widget.

Hotspot: X & Y,  Default: screen lower left.
The location of the brightest spot in the flare in screen coordinates. The hotspot parameter is ignored if the AutoTrack effect option is selected. This parameter can be adjusted using the Hotspot Widget.

Hotspot Uses Mocha: Check-box,  Default: off.
Controls whether the LensFlare hotspot is controlled by the Hotspot parameter or follows the Hotspot tracked inside of Mocha.

Smooth Hotspot Track: Integer,  Default: 0, Range: 0 or greater.
Controls how many points to average when stabilizing the Mocha point track.

Pivot: X & Y,  Default: screen center.
The elements of the flare will be in a line between the Hotspot and the Pivot locations. The Pivot is in screen coordinates relative to the center of the frame. This parameter can be adjusted using the Pivot Widget.

Pivot Uses Mocha: Check-box,  Default: off.
Controls whether the LensFlare pivot is controlled by the Pivot parameter or follows the Pivot tracked inside of Mocha.

Smooth Pivot Track: Integer,  Default: 0, Range: 0 or greater.
Controls how many points to average when stabilizing the Mocha point track.

Color: Default rgb: [1 1 1].
Scales the color of all flare elements.

Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of all the flare elements.

Gamma: Default: 1, Range: 0.1 or greater.
Increasing gamma brightens the flare, and especially boosts the darker elements.

Saturation: Default: 1, Range: any.
Scales the color saturation of the flare elements. Increase for more intense colors. Set to 0 for a monochrome lens flare.

Hue Shift: Default: 0, Range: -1 to 1.
Shifts the hue of the flare, in revolutions from red to green to blue to red.

Hotspot Color: Default rgb: [1 1 1].
Scales the color of the hotspot elements only.

Hotspot Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the hotspot elements only.

Rays Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the ray elements only.

Rays Num Scale: Default: 1, Range: 0 or greater.
Increases or decreases the number of rays.

Rays Length: Default: 1, Range: 0 or greater.
Adjusts the length of the rays without changing their thickness, or changing the size of the other flare elements.

Rays Thickness: Default: 1, Range: 0 or greater.
Adjusts the thickness of the individual rays within the flare.

Other Color: Default rgb: [1 1 1].
Scales the color of all flare elements that are NOT at the hotspot location.

Other Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of all flare elements that are NOT at the hotspot location.

Other Width: Default: 1, Range: 0 or greater.
Scales the width of all flare elements that are NOT at the hotspot location.

Atmosphere Amp: Default: 0, Range: 0 or greater.
Atmosphere gives the effect of the flare shining through a dusty atmosphere and picking up light or getting shadowed. This parameter adjusts the amount, or amplitude, of the atmospheric effect. Zero gives a smoother flare, higher values give more dirty look.

Atmosphere affects some parts of the flare but not others. This behavior can be adjusted for each element by toggling the Ignore Atmosphere setting within the Flare Designer. Typically, elements which originate within the camera (such as secondary reflections) should use Ignore Atmosphere, while elements which originate outside it (such as glows) should not.

Atmosphere Freq: Default: 1, Range: 0.1 to 20.
Controls the spatial frequency of the atmospheric noise. Turn this up higher to get finer details, turn down for broader overall variation.

Atmosphere Detail: Default: 0.6, Range: 0 to 1.
Controls the amount of fine detail in the atmosphere simulation. Decrease to get smoother atmosphere, increase for a more crunchy or grainy look.

Atmosphere Seed: Default: 0.123, Range: 0 or greater.
Used to initialize the random number generator for the atmospheric noise. The actual seed value is not significant, but different seeds give different results and the same value should give a repeatable result.

Atmosphere Speed: Default: 1, Range: any.
The cloudy noise in the atmosphere evolves over time like real dust clouds; this parameter controls how fast the cloud pattern changes over time. Set to zero for a static pattern.

Flicker Amp: Default: 0, Range: 0 or greater.
The amount of random flickering of the flare brightness.

Flicker Speed: Default: 1, Range: 0 or greater.
The speed of random flickering.

Flicker Randomness: Default: 0.6, Range: 0 to 1.
Controls the variability of the flicker. When set to zero, the flare will flicker constantly, with a small amount of random variation. At higher values, the flickering will have longer steady spells, with the occasional large spike.

Blur Flare: Default: 0, Range: 0 or greater.
If positive, the flare image is blurred by this amount before being combined with the background.

Scale Source: Default: 1, Range: 0 or greater.
Scales the brightness of the source clip before combining with the flare. If 0, the result will contain only the flare image over black.

Combine: Popup menu,  Default: Screen .
Determines how the flare image is combined with the source image.
Screen: performs a blend function which can help prevent overly bright results.
Add: causes the flare image to be added to the source.
Flare Only: gives only the flare image with no background.

Tint Bg Whites: Check-box,  Default: off.
If this is enabled, the chroma of the flare is added only after the result is clamped to the maximum brightness. This allows the color of the flare image to still be visible even over bright white backgrounds. For the majority of backgrounds there will be no observable difference.

Affect Alpha: Default: 0, Range: 0 or greater.
If this value is positive the output Alpha channel will include some opacity from the flare. The maximum of the red, green, and blue flare brightness is scaled by this value and combined with the Background Alpha at each pixel.

Edge Triggers Parameters:

Edge Width: Default: 0.3, Range: 0 or greater.
Creates a trigger zone at the edge of the screen which affects the brightness and size of the flare. This parameter controls the width of the zone. Setting it to zero will disable Edge Triggers.

Edge Falloff: Default: 2, Range: 0.01 or greater.
Controls the speed with which the intensity of the trigger decreases when moving away from the edge. A value of 1 results in a linear ramp. Values greater than one result in a steeper initial drop which gradually levels out. Values less than one result in a slope that starts gradually and gets steeper at the end.

Shift Out: Default: 0, Range: any.
Shifts the trigger zone outward from the edge of the screen, placing the peak off-screen. Negative values will shift the trigger zone inward toward the center of the image.

One Way: Check-box,  Default: off.
If this box is checked, the trigger will stay at maximum intensity when the Hotspot moves off-screen, instead of ramping back down as it moves farther from the edge.

Edge Scale Brightness: Default: 1.5, Range: 0 or greater.
Scales the Brightness by this amount when the trigger is at peak intensity. For example, a value of 3 will cause the flare to ramp up to 3 times its normal brightness as it passes through the trigger zone. If less than 1, the trigger will dim the flare instead of brightening it.

Edge Scale Widths: Default: 1.2, Range: 0 or greater.
Scales the width of the flare by this amount when the trigger is at peak intensity. For example, a value of 3 will cause the flare to expand to 3 times its normal size as it passes through the trigger zone. If less than 1, the trigger will shrink the flare instead of growing it.

Show Edge Zones: Check-box,  Default: off.
Overlays the output with a grayscale image which shows the location intensity of the Edge Triggers.

Center Radius: Default: 0.3, Range: 0 or greater.
Creates a trigger zone centered on the Pivot which affects the brightness and size of the flare. This parameter controls the radius of the zone. Setting it to zero will disable Center Triggers.

Center Falloff: Default: 1, Range: 0.01 or greater.
Controls the speed with which the intensity of the trigger decreases when moving away from the edge. A value of 1 results in a linear ramp. Values greater than one result in a steeper initial drop which gradually levels out. Values less than one result in a slope that starts gradually and gets steeper at the end.

Center Scale Brightness: Default: 1.5, Range: 0 or greater.
Scales the Brightness by this amount when the trigger is at peak intensity. For example, a value of 3 will cause the flare to ramp up to 3 times its normal brightness as it passes through the trigger zone. If less than 1, the trigger will dim the flare instead of brightening it.

Center Scale Widths: Default: 1.2, Range: 0 or greater.
Scales the width of the flare by this amount when the trigger is at peak intensity. For example, a value of 3 will cause the flare to expand to 3 times its normal size as it passes through the trigger zone. If less than 1, the trigger will shrink the flare instead of growing it.

Show Center Zone: Check-box,  Default: off.
Overlays the output with a grayscale image which shows the location intensity of the Center Trigger.

Occlusion Parameters:

Occlusion Softness: Default: 0.0224, Range: 0 or greater.
Increase this value to make the flare to fade out gradually as the Hotspot moves behind an object. Set it to zero to have the flare wink out suddenly. With large softness values, the Hotspot position is automatically adjusted toward non-occluded areas. This accurately simulates a large light source which is partially obscured, and it prevents the Hotspot from appearing in front of an occluding object.

Occlusion From: Popup menu,  Default: Alpha .
Selects the channels of the Occlusion image which control occlusion of the flare.
None: The flare is not occluded at all.
Luma: The flare is occluded by the luminance of the Occlusion clip. Black areas will show the flare, and white areas will obscure it.
Alpha: The flare is occluded by the alpha channel of the Occlusion clip. Use this if you have an RGBA clip of an object that should appear in front of the flare.

Invert Occlusion: Check-box,  Default: off.
If enabled, inverts the Occlusion clip so the flare is obscured by black areas instead of white.

Use Color: Check-box,  Default: on.
If enabled, colorizes the flare based on the color of the Occlusion clip. Use this to create stained glass effects when the Hotspot passes behind a transparent object.

Diffraction Glow: Default: 0, Range: 0 or greater.
Creates a glow on the edges of occluding objects that are near the hotspot, to simulate light bleeding around the edges of the object. This parameter controls the brightness of the glow.

Glow Width: Default: 0.4, Range: 0 or greater.
The width of the Diffraction Glow.

Glow Color: Default rgb: [1 1 1].
The color of the Diffraction Glow.

Glow Radius: Default: 0.2, Range: 0 or greater.
The distance from the hotspot at which Diffraction Glow is visible. The glow will fall off softly as distance from the hotspot increases. Objects outside this radius won't create any glow.

Occlusion Scale Brightness: Default: 1, Range: 0 or greater.
Enables a Trigger that adjusts the brighness of the flare as it's occluded. The brightness will ramp up to this value when the Hotspot is 50 percent occluded, then ramp back down to its normal brightness. At the same time, the flare will be fading out due to the occlusion, so its brightness will drop off quickly at the end. Works best when Occlusion Softness is turned up as well.

Occlusion Scale Widths: Default: 1, Range: 0 or greater.
Enables a Trigger that adjusts the size of the flare as it's occluded. The flare will expand up to this amount when the Hotspot is 50 percent occluded, then shrink back down to its normal size. At the same time, the flare will be fading out due to the occlusion, so it will appear to shrink quickly at the end. Works best when Occlusion Softness is turned up as well.

Performance: Popup menu,  Default: full flare .
Determine whether to render all elements or only select elements. Certain elements are selected in the Flare Designer to be important for the look of the Flare. Rendering with priority only should give the look and feel of the true LensFlare for previewing purposes but render quicker than the full flare.
full flare: Render all LensFlare elements.
priority only: Only render a subset of the LensFlare elements for increased performance.
See general info for: Apply To Title/Key , Crop/Transform , Motion Blur , Resolution , Clamp Output To Legal , Bypass Effect , and Reset .


See Also:

LensFlareAutoTrack
Glint
Glare
LightLeak
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash