Sapphire Plug-ins for Open Fx: TVDamage

S_TVDamage

Simulates a TV with transmission and reception problems, VCR issues, and TV hardware difficulties. Simulates static, interference, ghosting, horizontal and vertical hold, hum bars, color stripes, visible scanlines, VCR fast-forward, dropouts, vignetting, orthicon, fisheye, and turn-off.

In the Sapphire Stylize effects submenu.


Inputs:

Source: The clip to be processed.

Mask: Optional. Interpolate between the result and the Source input. White areas use the result of the effect. Black areas use the Source clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Effect: Popup menu,  Default: TVDamage Color .
Type of TV to simulate: color or black & white.
TVDamage Color: simulates a color TV.
TVDamage Mono: simulates a black & white TV.

Mocha Project: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.

Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.

Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.

Shift Mocha: X & Y,   Default: [0 0], Range: any.
Offsets the position of the Mocha Mask.

Bypass Mocha: Check-box,  Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.

Show Mocha Only: Check-box,  Default: off.
Bypass the effect and show the Mocha Mask itself.

Combine Masks: Popup menu,  Default: Union .
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
Union: Uses the area covered by both masks together.
Intersect: Uses the area that overlaps between the two masks.
Mocha Only: Ignore the Input Mask and only use the Mocha Mask.

Reception Master: Default: 0.4, Range: 0 or greater.
Master control for all reception-oriented artifacts: static, interference, ghosting, horizontal and vertical hold, hum bars, and color stripes. Turn to zero to get perfect reception, i.e. zero of each of the above artifacts.

Interference Amp: Default: 0.6, Range: 0 or greater.
Simulates interference from nearby electrical devices (electric motors, cordless phones, and so on). The look is a pattern of semi-regularly spaced random color dots. The dot size is controlled by the TV Pixels parameter. Scaled by Reception Master.

Ghost Amp: Default: 0.6, Range: 0 or greater.
Ghosts are copies of the image that result from multipath distortion between the transmitter and the TV. Turn up this parameter to get stronger ghosts. Scaled by Reception Master.

Horizontal Hold: Default: 0.5, Range: 0 or greater.
This causes the image to shift horizontally in a semi-random way, simulating a TV with a bad horizontal hold circuit, or a signal not strong enough to engage the horizontal hold. Scaled by Reception Master.

Vertical Hold: Default: 0.8, Range: 0 or greater.
This causes the image to shift vertically in a rolling motion, and is normally caused by a weak signal preventing the TV from locking on. This parameter controls the fraction of the time that the image is having hold problems. Set to zero for no vertical hold problems. Scaled by Reception Master.

Bars Brightness: Default: 0.3, Range: 0 or greater.
Power line hum and other TV problems can cause rolling light and dark bars to crawl up the screen. This can also be caused by failure to synchronize a video camera to the TV output. This parameter controls the overall strength of these bars. There are two sets of bars, one large and one small, that mutually interfere. This parameter controls the overall brightness scale of the bars. Turn to zero for no bars. Scaled by Reception Master.

Color Stripes Amplitude: Default: 0.2, Range: 0 or greater.
Another common form of interference, color stripes are caused by phase shifts in the chroma signal, among other things. This parameter controls the overall brightness of the color stripes. Scaled by Reception Master.

Fast Forward Amount: Default: 0, Range: 0 or greater.
Generates a VCR fast-forward look with torn bars across the screen.

Tape Dropout Brightness: Default: 0, Range: 0 or greater.
Generates VCR dropouts on random frames, at random times.

Vignette Darkness: Default: 0, Range: 0 to 1.
Vignetting is darkening of the image towards the corners and sides of the image. This parameter controls how much the outer corners of the screen should be darkened (vignetted). 0 gives no vignetting, 1 gives maximum darkening.

Static Amplitude: Default: 0.8, Range: 0 or greater.
Scales the brightness of the static noise. Scaled by Reception Master. The static dot size is controlled by the TV Pixels parameter.

Static Density: Default: 0.7, Range: 0.01 to 1.
Density of the static; turn up to get more static pixels; turn down to get only occasional static pixels.

Interference Frequency: Default: 1.28, Range: 0 to 500.
Interference frequency. The look is very sensitive to this parameter. Fractional values like 0.3 or 1.23 look better than integers. Animating it very slightly, say from 1.27 to 1.3 gives a nice look.

Dots Speed: X & Y,   Default: [100 -10], Range: any.
The dot pattern moves with this speed over time in X and Y.

Jitter Amount: Default: 10, Range: 0 to 1000.
Turning this up makes the dot pattern jitter randomly between frames for more realism.

Num Ghosts: Integer,  Default: 5, Range: 0 to 30.
The number of ghost images. Some may be ahead (to the left of) the source image, most will be to the right. Some will be positive and some negative (inverted). See Shift and Negative Ghosts below.

Negative Ghosts: Default: 0.5, Range: 0 to 1.
The fraction of the ghosts that are negative (inverted), on average.

Spacing: Default: 0.2, Range: 0 or greater.
The fraction of the image width over which ghost images are spread out.

Vary Position: Default: 0.3, Range: 0 to 1.
Controls the regularity of the ghost image spacing. Set to zero for regularly spaced ghosts; set to one for random positioning.

Shift: Default: 0.5, Range: -1 to 1.
Shifts the ghost images to the left or right, without shifting the main image.

Blur: Default: 0, Range: 0 or greater.
Blurs the ghost images without blurring the main image or any other artifacts.

H Frequency: Default: 1.25, Range: 0 or greater.
Vertical frequency of the horizontal-hold waves.

H Time Vary: Default: 0.5, Range: 0 or greater.
Modulates the horizontal-hold waves over time by this amount. When increased, some frames will have more horizontal shifting while other frames will have less.

H Octaves: Integer,  Default: 3, Range: 1 to 10.
Octaves for the horizontal hold waves. Increase for spikier look, decrease for smoother waves.

Border Width: Default: 0.05, Range: 0 or greater.
A TV signal has a black border outside the displayed area; this becomes visible when the horizontal hold isn't working. This parameter controls the width of that black border. On the other side of the border, you see another copy of the image.

V Frequency: Default: 2, Range: 0 or greater.
The frequency of vertical hold jumps. Decrease to get a more consistent rolling motion, or increase to get a jumpier look.

V Speed: Default: 2, Range: 0 or greater.
The average speed of the vertical hold rolling motion over time.

V Random: Default: 0.1, Range: 0 or greater.
Controls how much randomness there is in the vertical hold rolling motion. Set to zero for smooth rolling, 1 or more for jittery behavior.

Border Height: Default: 0.1, Range: 0 or greater.
Like Border Width, this controls the vertical border between frames that becomes visible when vertical hold is not locked. Some static and closed-captioning and timecode information will typically be visible in this border.

Border Data: Default: 1, Range: 0 to 10.
Brightness of the dots and lines that appear in the vertical blanking interval specified by Border Width.

Bar Roll Speed: Default: 0.5, Range: -10 to 10.
The speed of the bars rolling up the screen. Turn negative for downward rolling.

Bar Sharpness: Default: 0.5, Range: 0.1 to 10.
Sharpens or smooths the top and bottom edges of the main bars. Set to zero for no main bars; you will only see the smaller bars.

Bar Frequency: Default: 1, Range: 0.1 or greater.
The frequency of the bars; turn up for more thinner bars, turn down for fewer fat bars.

Bar1 Width: Default: 0.35, Range: 0 to 1.
Fraction of the main bar that is light; the rest is dark.

Bar2 Rel Frequency: Default: 6, Range: 1 or greater.
Controls the frequency of the smaller bars.

Bar2 Sharpness: Default: 0.5, Range: 0.01 to 10.
Sharpens or smooths the top and bottom edges of the smaller bars. Set to zero for no small bars; you will only see the main bars.

Color Frequency: Default: 10, Range: 1 to 40.
Spatial frequency of the color stripes.

Color Angle: Default: 160, Range: any.
Angle of the stripes.

Roll Speed: Default: 3, Range: 0 or greater.
Controls how fast the stripes roll over time.

FF Band Frequency: Default: 4, Range: 0 or greater.
How many fast-forward bands to create.

FF Band Shift: Default: 0.1, Range: 0 or greater.
Shifts the fast-forward bands up or down.

FF Band Height: Default: 0.16, Range: 0 to 1.
The height of each fast-forward band.

Dropout Length: Default: 0.25, Range: 0 to 1.
The average length of each dropout scanline.

Dropout Gap Length: Default: 0.2, Range: 0 to 2.
The average length of the gaps between the dropouts.

Dropout Y Freq: Default: 5, Range: 0 to 50.
The dropouts appear on random scanlines according to a noise function with this frequency. Decrease to get a few large bands of dropouts; increase to get lots of small bands of dropouts.

Dropout Y Threshold: Default: 0.75, Range: 0 to 1.
Increase to cover more of the screen with dropouts (on average); decrease to cover less of it. If you don't see any dropouts at all on some frames, increase this parameter.

Dropouts Always: Default: 1, Range: 0 to 1.
Dropouts only appear on some frames; increase this parameter to see dropouts on more frames, so they occur more frequently in time. If you don't see dropouts on any frames, increase this parameter.

Vignette Radius: Default: 1, Range: 0 or greater.
Distance from the center where the vignetting starts.

Vignette Edge Softness: Default: 0.5, Range: 0 or greater.
The width of the vignette's soft edge. Larger values give softer, less visible edges.

Vignette Rel Height: Default: 0.75, Range: 0.1 or greater.
Controls the aspect ratio of the vignette ellipse. This should normally be set to the aspect ratio of the image, e.g. .75 for NTSC.

Scanlines: Default: 0.1, Range: 0 or greater.
Creates visible scanlines in the image. Increase to get more intense scanlines, or set to zero for no scanlines. The width of the scanlines is controlled by the TV Pixels parameter and Scanlines Rel Freq.

Scanlines Rel Freq: Default: 1, Range: 0 or greater.
Relative frequency of the TV scanlines. Increase to get more scanlines, decrease to get fewer large scanlines. Note that the number of scanlines is also controlled by the TV Pixels parameter.

Orthicon: Default: 0, Range: 0 or greater.
Darkens the clip at areas around parts of the source clip that are brighter than the given threshold, to simulate a 1950s 'orthicon' TV camera look. Most useful in black & white mode.

Threshold: Default: 0.7, Range: 0 or greater.
Darkening will occur around locations in the source clip that are brighter than this value. A value of 0.9 causes dark glows from only the brightest spots. A value of 0 causes glows for every non-black area.

Darks Width: Default: 0.2, Range: 0 or greater.
Scales the dark glow distance.

Color Correct Parameters:

Hue Shift: Default: 0, Range: any.
Shift the color hues by this amount.

Saturation: Default: 1, Range: any.
Scales the color saturation. Increase for more intense colors. Set to 0 for monochrome.

Scale Lights: Default: 1, Range: 0 or greater.
Scales the result by this gray value. Increase for a brighter result.

Offset Darks: Default: 0, Range: any.
Adds this gray value to the darker regions of the result. This can be negative to increase contrast.

Tint Lights: Default rgb: [1 1 1].
Scales the result by this color, thus tinting the lighter regions.

Tint Darks: Default rgb: [0 0 0].
Adds this color to the darker regions of the result. Set this to a dark red-orange color for a negative-film effect look.

Turn Off: Default: 0, Range: 0 to 1.
Animate this parameter from 0 to 1 to simulate the TV turning off. The image will turn white and shrink to a dot in the center, with a flash near the end.

Flare Width: Default: 1, Range: 0 or greater.
Width of the flare or flash near the end of the turn-off sequence. Set to zero to omit this flash.

Flare Brightness: Default: 2, Range: 0 or greater.
Brightness of the flare or flash near the end of the turn-off sequence.

Fade Out Time: Default: 0.7, Range: 0 to 1.
The length of the fade out during the Turn Off sequence. A value of one produces a smooth, gradual fade as Turn Off increases. As the value decreases, the fade will start later (at higher values of Turn Off), and progress more quickly. When Fade Out Time is set to zero, the fade will cut to black instantly when Turn Off reaches one.

Fish Eye: Default: 0, Range: any.
Expands the center of the source clip as if viewed through a fish-eye lens. This gives an old-time slightly rounded TV look.

Tv Pixels: Default: 720, Range: 1 or greater.
The number of 'TV pixels' across the screen. Controls the size of the static, interference, scanlines, and dropouts. Lower this to simulate a lower resolution TV.

Seed: Default: 0.123, Range: 0 or greater.
Used to initialize the random number generator. The actual seed value is not significant, but different seeds give different results and the same value should give a repeatable result.

Mask Use: Popup menu,  Default: Luma .
Determines how the Mask input channels are used to make a monochrome mask.
Luma: the luminance of the RGB channels is used.
Alpha: only the Alpha channel is used.

Blur Mask: Default: 0.05, Range: 0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.

Invert Mask: Check-box,  Default: off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.


See Also:

JpegDamage
FilmDamage
DigitalDamage
FilmEffect
ScanLines
TVChannelChange
Vignette
HalfTone
Diffuse
GrainStatic
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash