S_MochaWhipA WhipLash style transition where a CutOut section of one of the clips whips around in front of the transition to settle in its final location in the destination clip. The CutOut section is defined using Mocha within the effect.In the Sapphire Transitions effects submenu.
Inputs:
|
|
Parameters:
-
Load Preset:
Push-button
.
Brings up the Preset Browser to browse all available presets for this effect.
-
Save Preset:
Push-button
.
Brings up the Preset Save dialog to save a preset for this effect.
-
Mocha Project:
Default:
0,
Range:
0 or greater.
Brings up the Mocha window for tracking footage and generating masks.
-
Blur Mocha:
Default:
0,
Range:
0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.
-
Mocha Opacity:
Default:
1,
Range:
0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.
-
Invert Mocha:
Check-box, ย Default:
off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.
-
Resize Mocha:
Default:
1,
Range:
0 to 2.
Scales the Mocha Mask. 1.0 is the original size.
-
Resize Rel X:
Default:
1,
Range:
0 to 2.
The relative horizontal size of the Mocha Mask.
-
Resize Rel Y:
Default:
1,
Range:
0 to 2.
The relative vertical size of the Mocha Mask.
-
Shift Mocha:
X & Y, ย Default:
[0 0],
Range:
any.
Offsets the position of the Mocha Mask.
-
Dilate Mocha:
Default:
0,
Range:
-100 to 100.
Dilates or erodes the Mocha Mask by this pixel amount before using.
-
Dilation Quality:
Popup menu, ย Default: Fast
.
Selects whether Dilate Mocha adusts quickly in default Fast mode or looks better in High quality mode.
-
Fast:
Dilate Mocha in Fast mode for quick adjustments.
- High: Dilate Mocha in High quality mode for a better looking mask shape.
- High: Dilate Mocha in High quality mode for a better looking mask shape.
-
Fast:
Dilate Mocha in Fast mode for quick adjustments.
-
Bypass Mocha:
Check-box, ย Default:
off.
Ignore the Mocha Mask and apply the effect to the entire source clip.
-
Show Mocha Only:
Check-box, ย Default:
off.
Bypass the effect and show the Mocha Mask itself.
-
Input For Tracking:
Popup menu, ย Default: To
.
Which input should be shown in Mocha to generate the CutOut's mask.
-
From:
Use the outgoing clip for Mocha tracking.
- To: Use the incoming clip for Mocha tracking.
- To: Use the incoming clip for Mocha tracking.
-
From:
Use the outgoing clip for Mocha tracking.
-
Transition Dir:
Popup menu, ย Default: Wipe Off to Bg
.
Selects the direction of the transition.
-
Wipe Off to Bg:
transitions from the current layer to the Background.
- Wipe On from Bg: transitions from the Background to the current layer.
- Wipe On from Bg: transitions from the Background to the current layer.
-
Wipe Off to Bg:
transitions from the current layer to the Background.
-
Auto Trans:
Popup YES-NO, ย Default: No
.
If enabled, a transition is performed automatically between the first and last frames of the layer. If this is off, the transition is performed manually by animating the Mocha Percent parameter.
-
Wipe Percent:
Default:
0,
Range:
0 to 1.
Auto Trans must be disabled for this parameter to be used. It determines the transition ratio between the From and To inputs, and would normally be animated from 0 to 100 to perform a complete transition. The curve controlling this parameter can be adjusted for more detailed control over the timing of the wipe.
-
Cutout Offset Start:
X & Y, ย Default:
[0 0],
Range:
-3 to 3.
Where to offset the CutOut to on the first frame of the transition.
-
Cutout Shift:
X & Y, ย Default:
[2 0],
Range:
any.
Translates CutOut horizontally or vertically.
-
Cutout Fadein Time:
Default:
0.5,
Range:
0 to 1.
At what dissolve amount should the CutOut fade in.
-
Cutout Center:
X & Y, ย Default:
[0 0],
Range:
any.
Center of the CutOut. The cutout rotate and cutout scale parameters operate around this point.
-
Cutout Rotate:
Default:
0,
Range:
any.
How many degrees to rotate the CutOut through over the course of the transition.
-
Cutout Motion Blur:
Default:
0.3,
Range:
0 or greater.
Scales the amount of blur to use on the CutOut's motion.
-
Cutout Scale:
Default:
1.2,
Range:
1 to 100.
Scales the size of the CutOut.
-
Cutout Whip Out:
Popup menu, ย Default: Smooth
.
End of CutOut motion
-
Smooth:
Smooth decelerate
- Bounce: Overshoot with bounce to stop
- Snap: Overshoot then snap to stop
- Bounce: Overshoot with bounce to stop
-
Smooth:
Smooth decelerate
-
Cutout Wrap:
X & Y, ย Popup menu, ย Default:
[
Tile Tile
].
How the CutOut should behave when it gets to the edge of its original image.
-
No:
If the CutOut moves off screen, it will stay off screen.
- Tile: If the CutOut moves off screen and scale is set to 1.0, it will wrap around. If scale is larger it may leave screen for a time before wrapping.
- Reflect: If the CutOut moves off screen and scale is set to 1.0, it will bounce. If scale is larger it may leave screen for a time before bouncing.
- Tile: If the CutOut moves off screen and scale is set to 1.0, it will wrap around. If scale is larger it may leave screen for a time before wrapping.
-
No:
If the CutOut moves off screen, it will stay off screen.
-
Cutout Mix RGB:
Default:
0,
Range:
0 to 1.
CutOut blend in optional RGB split / blur
-
Cutout Blur Amount:
Default:
1.25,
Range:
0 or greater.
Blur the CutOut by this amount.
-
Cutout Angle:
Default:
0,
Range:
any.
-
Cutout Shift RGB:
Default:
2,
Range:
any.
Shifts the CutOut in the direction of the blur. A negative shift amount shifts the image in the opposite direction.
-
Cutout Blur Red:
Default:
1,
Range:
0 or greater.
Blurs the red chroma of the CutOut by this relative amount.
-
Cutout Blur Green:
Default:
0.5,
Range:
0 or greater.
Blurs the green chroma of the CutOut by this relative amount.
-
Cutout Blur Blue:
Default:
0,
Range:
0 or greater.
Blurs the blue chroma of the CutOut by this relative amount.
-
Cutout Shift Red:
Default:
0.5,
Range:
any.
Shift the red component of the CutOut.
-
Cutout Shift Green:
Default:
0.25,
Range:
any.
Shift the green component of the CutOut.
-
Cutout Shift Blue:
Default:
0,
Range:
any.
Shift the blue component of the CutOut.
-
Cutout Brightness:
Default:
1,
Range:
0 or greater.
Scale the brightness of the CutOut.
-
Background Whip Side:
Popup menu, ย Default: Both
.
Which clip(s) to use in the background WhipLash - the incoming, the outgoing, or both.
-
Both:
Apply WhipLash styling to both clips.
- From: Only apply WhipLash styling to the outgoing clip.
- To: Only apply WhipLash styling to the incoming clip.
- From: Only apply WhipLash styling to the outgoing clip.
-
Both:
Apply WhipLash styling to both clips.
-
Background Center:
X & Y, ย Default:
[0 0],
Range:
any.
The location of the whip center in screen coordinates relative to the center of the frame. This parameter can be set by enabling and moving the Center Widget. Note that moving the whip center can also cause the whip size to change so that the current value of Wipe Amt remains correct.
-
Background Motion Blur:
Default:
1,
Range:
0 or greater.
Scales the amount of motion blur to use.
-
Background Rotate:
Default:
0,
Range:
any.
Rotates by the specified angle in degrees.
-
Background Shift:
X & Y, ย Default:
[-2 0],
Range:
any.
Translation of the whip pattern.
-
Background Scale:
Default:
1,
Range:
0 to 2.
Scales the size of the clips.
-
Background Whip Out:
Popup menu, ย Default: Smooth
.
End of transition motion
-
Smooth:
Smooth decelerate
- Bounce: Overshoot with bounce to stop
- Snap: Overshoot then snap to stop
- Bounce: Overshoot with bounce to stop
-
Smooth:
Smooth decelerate
-
Background Wrap From:
X & Y, ย Popup menu, ย Default:
[
Tile Tile
].
What Background WhipLash should look like outside the borders of the outgoing clip.
-
No:
gives black beyond the borders.
- Tile: repeats a copy of the image.
- Reflect: repeats a mirrored copy. Edges are often less visible with this method.
- Tile: repeats a copy of the image.
-
No:
gives black beyond the borders.
-
Background Wrap To:
X & Y, ย Popup menu, ย Default:
[
Tile Tile
].
What Background WhipLash should look like outside the borders of the incoming clip.
-
No:
gives black beyond the borders.
- Tile: repeats a copy of the image.
- Reflect: repeats a mirrored copy. Edges are often less visible with this method.
- Tile: repeats a copy of the image.
-
No:
gives black beyond the borders.
-
Background Mix RGB:
Default:
0,
Range:
0 to 1.
Blend in optional RGB split / blur
-
Background Blur Amount:
Default:
1.25,
Range:
0 or greater.
Scales the width of the blur.
-
Background Angle:
Default:
0,
Range:
any.
The rotation of the overall whip pattern used for the wipe, in degrees.
-
Background Shift RGB:
Default:
2,
Range:
any.
Shifts the image in the direction of the blur. A negative shift amount shifts the image in the opposite direction.
-
Background Bias:
Default:
0.5,
Range:
0 to 1.
Varies the weight of the pixels along the path of the blur, which gives the appearance of trails or streaks in a single direction. A value of 0.5 weights all pixels evenly. A value of 1 causes the weight to increase toward the direction of the blur, while a value of 0 has the opposite effect.
-
Background Blur Red:
Default:
1,
Range:
0 or greater.
The blur width of the red channel, relative to Blur Amount.
-
Background Blur Green:
Default:
0.5,
Range:
0 or greater.
The blur width of the green channel, relative to Blur Amount.
-
Background Blur Blue:
Default:
0,
Range:
0 or greater.
The blur width of the blue channel, relative to Blur Amount.
-
Background Shift Red:
Default:
0.5,
Range:
any.
Additional amount to shift the red color channel.
-
Background Shift Green:
Default:
0.25,
Range:
any.
Additional amount to shift the green color channel.
-
Background Shift Blue:
Default:
0,
Range:
any.
Additional amount to shift the blue color channel.
-
Background Brightness:
Default:
1,
Range:
0 or greater.
Scales the brightness of the result.
-
Background Offset Darks:
Default:
0,
Range:
-8 to 2.
Adds this gray value to the darker regions of the result. This can be negative to increase contrast.
-
Background Edge Mode:
Popup menu, ย Default: Reflect
.
Determines the behavior when accessing areas outside the source image.
-
Transparent:
Areas outside the source image are treated as transparent, which can produce
transparency around the edges of the image.
Select this for fastest rendering.
- Repeat: Repeats the last pixel outside the border of the image.
- Reflect: Reflects the image outside the border.
- Repeat: Repeats the last pixel outside the border of the image.
-
Transparent:
Areas outside the source image are treated as transparent, which can produce
transparency around the edges of the image.
Select this for fastest rendering.
-
Soft Borders:
Check-box, ย Default:
off.
If enabled, transparent borders are added to the input image before processing. This allows the result to include soft edges beyond the original image size. When off, the effect only occurs within the frame and the result will retain an edge at the borders.
-
Opacity:
Popup menu, ย Default: Normal
.
Determines the method used for dealing with opacity/transparency.
-
All Opaque:
Use this option to render slightly faster when
the input image is fully opaque with no transparency (alpha=1).
- Normal: Process opacity normally.
- As Premult: Process as if the image is already in premultiplied form (colors have been scaled by opacity). This option also renders slightly faster than Normal mode, but the results will also be in premultiplied form, which is sometimes less correct.
- Normal: Process opacity normally.
-
All Opaque:
Use this option to render slightly faster when
the input image is fully opaque with no transparency (alpha=1).
