Sapphire Plug-ins for Autodesk: ZebrafyColor

Psyko: ZebrafyColor

In the S_Psyko Plugin.

Modulates the brightness of the source clip with sinusoids for each color channel to give a color striped effect.

Inputs:

Source: The clip to be processed.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Source Blur: Default: 0.1, Range: 0 or greater, Shared .
Smooths the source edges by this amount.

Frequency: Default: 3, Range: 0 or greater.
The frequency of the stripe pattern. Increase for more color cycles.

Freq Red: Default: 1, Range: 0 or greater, Shared .
The frequency of the red color component. Increase for more cycles in the red channel.

Freq Green: Default: 1.1, Range: 0 or greater, Shared .
The frequency of the green color component. Increase for more cycles in the green channel.

Freq Blue: Default: 1.2, Range: 0 or greater, Shared .
The frequency of the blue color component. Increase for more cycles in the blue channel.

Subpixel: Check-box,  Default: on, Shared .
Enables subpixel-width blur. Use this for smoother animation of the Source Blur parameter.

Brightness: Default: 1, Range: 0 or greater, Shared .
Scales the brightness of the result.

Color: Default rgb: [1 1 1], Shared .
Scales the color of the result. For example, if it is yellow [1 1 0], the blue of the result will be 0.

Offset: Default: 0, Range: any, Shared .
Adds this gray value to the result (or subtracts if negative). 0 has no effect, .5 is middle gray, and 1 is white.

Scale By Source: Default: 0, Range: 0 to 1, Shared .
The brightness of the output is scaled down by the original source brightness as this is increased to 1.

Scale By Src Amp: Default: 1, Range: 0 or greater, Shared .
This amplifies the effect of Scale By Source, so if increased above 1, the middle grays can still retain their full brightness. It has no effect unless Scale By Source is positive.

Mix With Source: Default: 0, Range: 0 to 1, Shared .
Interpolates between the result (0) and the original source (1).

Saturation: Default: 1, Range: 0 or greater, Shared .
Scales the strength of the colors. Increase for more intense colors, or decrease for muted colors.

Params2:

Phase Speed: Default: 1, Range: any.
The phase speed of the stripe pattern. If non-zero, the stripes are automatically animated to flow at this rate.

Phase Start: Default: 0, Range: any.
The phase shift of the stripe pattern.

Phase Red: Default: 0, Range: any, Shared .
The phase offset of the red color component.

Phase Green: Default: 0, Range: any, Shared .
The phase offset of the green color component.

Phase Blue: Default: 0, Range: any, Shared .
The phase offset of the blue color component.

Params3:

Mocha: Default: 0, Range: 0 or greater, Shared .
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater, Shared .
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1, Shared .
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off, Shared .
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Show Mocha Only: Check-box,  Default: off, Shared .
Bypass the effect and show the Mocha Mask itself.

Bypass Mocha: Check-box,  Default: off, Shared .
Ignore the Mocha Mask and apply the effect to the entire source clip.
See general info for: Res , On Fields , Redraw , Undo , Load Defaults , Crop , Add Noise , and Use Gamma .


See Also:

Zebrafy
PseudoColor
Solarize
PsykoBlobs
PsykoStripes
Sapphire Plug-ins Introduction

PRODUCT UPDATES & SPECIAL OFFERS

Join our email newsletter and keep up to date