Sapphire Plug-ins for AVX2: TextureTiles

S_TextureTiles

TextureTiles draws a repeating pattern of tiles. The shapes can be hexagons, triangles, diamonds, stars, or variations on those, depending on the Morph parameters.

In the Sapphire Render category.


Inputs:

Source: The current track. The clip to combine the texture image with. This may be ignored if the Combine option is set to Texture Only.

Background: Optional. Composites the Source and texture over this clip.

Mask: Optional. Interpolate between the result and the Source input. White areas use the result of the effect. Black areas use the Source clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Mocha: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.

Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.

Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.

Shift Mocha: X & Y,   Default: [0 0], Range: any.
Offsets the position of the Mocha Mask.

Bypass Mocha: Check-box,  Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.

Show Mocha Only: Check-box,  Default: off.
Bypass the effect and show the Mocha Mask itself.

Combine Masks: Popup menu,  Default: Union .
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
Union: Uses the area covered by both masks together.
Intersect: Uses the area that overlaps between the two masks.
Mocha Only: Ignore the Input Mask and only use the Mocha Mask.

Size: Default: 0.5, Range: 0 or greater.
The size of each tile, within its cell. Zero will give all color0, one will give all color1. This doesn't change the overall size of the pattern; use Frequency for that.

Frequency: Default: 5, Range: 0.01 or greater.
Spatial frequency of the tile pattern; increase for many smaller tiles, decrease for fewer large tiles. This parameter can be adjusted using the Frequency Widget.

Angle: Default: 0, Range: any.
Rotates the whole pattern around the center point. Use Shift to adjust the center of rotation.

Rel Width: Default: 1, Range: 0.2 or greater.
Squashes or stretches the pattern.

Rel Wid Pre Rot: Default: 1, Range: 0.1 or greater.
Squashes or stretches the pattern before rotating by Angle. Use this if you want to squash or stretch and have the whole squashed/stretched pattern rotate around the center. If Angle is zero, this has the same effect as Rel Width.

Shift: X & Y,  Default: screen center.
Shift the whole pattern on the screen. Also sets the center point for rotation, Morph Radial, and Size Radial.

Morph Parameters:

Morph Shapes: Default: 0, Range: any.
Changes the shapes of the tiles smoothly, from hexagons to triangles, diamonds, and stars.

Morph Speed: Default: 0.5, Range: any.
Automatically animates the shape morphing over time. A value of one means a complete morph cycle once per second.

Morph Grad Add: Default: 0, Range: any.
Change the shape morphing across the image, so the left side has one shape, and the right side another. See Morph Grad Angle to change the angle of this gradient.

Morph Grad Angle: Default: 0, Range: any.
Angle of the morph gradient. If Morph Grad Add is zero, this has no effect.

Morph Radial: Default: 0, Range: any.
Morph the shapes radially away from the center point; the shapes will be (for instance) hexagons in the center, smoothly becoming different toward the edges of the image. Morph Shapes and Morph Speed also interact with this parameter.

Size Parameters:

Size Grad Add: Default: 0, Range: -10 to 10.
Change the size of the shapes (like the Size parameter) differently across the image.

Size Grad Angle: Default: 0, Range: any.
Angle of the size gradient. If Size Grad Add is zero, this has no effect.

Size Radial: Default: 0, Range: any.
Change the size of the shapes (like the Size parameter) according to the distance from the center point. Increase to make the sizes smaller around the edges.

Softness Parameters:

Edge Softness: Default: 0.15, Range: 0 or greater.
Softens the edges of each tile. If Softness Red/Green/Blue are not one, there will be some color fringing around the edges of the tiles when this is on.

Softness Red: Default: 0, Range: 0 or greater.
Relative softness of the red channel; see Edge Softness. To remove the color fringing around the edges of the tiles, set all the Softness Red/Green/Blue to one.

Softness Green: Default: 1, Range: 0 or greater.
Relative softness of the green channel; see Edge Softness. To remove the color fringing around the edges of the tiles, set all the Softness Red/Green/Blue to one.

Softness Blue: Default: 2, Range: 0 or greater.
Relative softness of the blue channel; see Edge Softness. To remove the color fringing around the edges of the tiles, set all the Softness Red/Green/Blue to one.

Other Parameters:

Invert: Check-box,  Default: off.
Invert the whole pattern, swapping the dark and bright areas.

Brightness1: Default: 1, Range: 0 or greater.
Scales the brightness of Color1. Increase for more contrast.

Color1: Default rgb: [1 1 1].
The color of the 'brighter' parts of the texture. The colors of the result are determined by an interpolation between Color0 and Color1.

Color0: Default rgb: [0 0 0].
The color of the 'darker' parts of the texture.

Offset0: Default: 0, Range: any.
Adds this value to color0. Decrease to a negative value for more contrast.

Scale Bg: Default: 1, Range: 0 or greater.
The source brightness is scaled by this value before being combined with the texture.

Combine: Popup menu,  Default: Screen .
Determines how the texture is combined with the source image.
Texture Only: gives only the texture image with no source.
Mult: the texture is multiplied by the source.
Add: the texture is added to the source.
Screen: the texture is blended with the source using a screen operation.
Difference: the result is the difference between the texture and source.
Overlay: the texture is combined with the source using an overlay function.

Mask Use: Popup menu,  Default: Luma .
Determines how the Mask input channels are used to make a monochrome mask.
Luma: the luminance of the RGB channels is used.
Alpha: only the Alpha channel is used, or if there is no valid Alpha channel the Red channel is used.

Blur Mask: Default: 0.05, Range: 0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.

Invert Mask: Check-box,  Default: off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
See general info for: Apply To Title/Key , Crop/Transform , Resolution , Clamp Output To Legal , Bypass Effect , and Reset .


See Also:

TextureFolded
TextureWeave
TexturePlasma
TextureNoiseEmboss
TextureNoisePaint
TextureSpots
TextureCells
TextureChromaSpiral
TextureMoire
TextureNeurons
TextureLoops
TextureFlux
WipeTiles
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash