Sapphire Plug-ins for AVX2: EdgeRays

S_EdgeRays

Generates beams of light emitting from the edges of the source clip. You can provide a Mask input to selectively scale the colors of the rays. If Mask Type is set to Color, you can also use the Mask input to colorize the rays differently in different regions. Set the Rays Res parameter to 1/2 for faster rendering with slightly softer rays.

In the Sapphire Lighting category.


Inputs:

Source: The current track. The clip to be processed.

Background: Optional. The clip to use as background. The output of the effect is composited over this clip.

Mask: Optional. If provided, the ray colors are scaled by this input. A monochrome mask can be used to choose a subset of areas that will generate rays. If the Mask Type is set to Color, a color mask input can be used to selectively adjust the ray colors in different regions. This input can optionally be blurred or inverted using the Blur Mask or Invert Mask parameters.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Mocha: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.

Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.

Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.

Shift Mocha: X & Y,   Default: [0 0], Range: any.
Offsets the position of the Mocha Mask.

Bypass Mocha: Check-box,  Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.

Show Mocha Only: Check-box,  Default: off.
Bypass the effect and show the Mocha Mask itself.

Combine Masks: Popup menu,  Default: Union .
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
Union: Uses the area covered by both masks together.
Intersect: Uses the area that overlaps between the two masks.
Mocha Only: Ignore the Input Mask and only use the Mocha Mask.

Center: X & Y,  Default: screen center.
The location from which the rays beam outwards. This parameter can be adjusted using the Center Widget.

Rays Length: Default: 0.25, Range: -5 to 1.
The length of the rays. A length of 1.0 gives rays that continue forever, although they may still fade out as they go. To make the rays look longer you can also increase the Bias Outer Bright parameter. If Rays Length is negative the rays can beam inwards instead of outwards. Note that processing times increase for longer rays. This parameter can be adjusted using the Center Widget.

Length Red: Default: 1, Range: 0 or greater.
The relative length of the red channel of the rays. Adjust this, along with Length Green and Length Blue, to create color fringing effects.

Length Green: Default: 1, Range: 0 or greater.
The relative length of the green channel of the rays.

Length Blue: Default: 1, Range: 0 or greater.
The relative length of the blue channel of the rays.

Reverse Rays: Default: 0, Range: 0 to 5.
Extend rays inward as well as outward. The length of the reversed rays is controlled by Rays Length as well as this parameter.

Rays Brightness: Default: 2, Range: 0 or greater.
Scales the brightness of the ray beams.

Rays Color: Default rgb: [1 1 1].
Scales the color of the ray beams.

Enable Dark Rays: Check-box,  Default: off.
Allow rays to darken the source as well as brighten it. If enabled, a dark Rays Color will cause rays to darken the source. A bright Rays Color will brighten the source as usual.

Bias Outer Bright: Default: 0, Range: 0 to 1.
Determines the variable amount of brightness along the rays. This is normally near 0 so the rays fade away at their outer ends, 0.5 causes equal brightness along the rays, and 1.0 causes maximum brightness at the ends.

Rays Res: Popup menu,  Default: Full .
Selects the resolution factor for the rays. Higher resolutions give sharper rays, lower resolutions give smoother rays and faster processing. This 'Res' factor only affects the rays: the background is still combined with the rays at full resolution.
Full: Full resolution is used.
Half: The rays are calculated at half resolution.
Quarter: The rays are calculated at quarter resolution.

Show: Popup menu,  Default: Result .
Selects between output options.
Result: outputs the rays over the Background.
Edges: outputs only the edge image. This can useful during the adjustment of the edge or shimmer parameters.
Rays: outputs only the image of rays on a black background.

Edge Thickness: Default: 0.03, Range: 0 or greater.
The thickness of the edges which generate the rays.

Edge Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the edges which generate the rays.

Edge Subpixel: Check-box,  Default: on.
Enables subpixel Edge Thickness amounts. Turn this on you are animating Edge Thickness or if you want finer control of small values.

Shimmer Amp: Default: 0.5, Range: 0 or greater.
Modulates the ray source image with this amount of noise texture to give the rays a shimmering look.

Shimmer Freq: Default: 40, Range: 0.1 or greater.
The frequency of the shimmer texture. Increase for a finer grained shimmer effect, decrease for larger, softer shimmer. This has no effect unless Shimmer Amp is positive.

Shimmer Seed: Default: 0.123, Range: 0 or greater.
Used to initialize the random number generator for the shimmer texture. The actual seed value is not significant, but different seeds give different results and the same value should give a repeatable result.

Shimmer Shift: X & Y,   Default: [0 0], Range: any.
Translation of the shimmer texture. This has no effect unless Shimmer Amp is positive.

Shimmer Speed: X & Y,   Default: [0 0], Range: any.
Translation speed of the shimmer texture. If non-zero, the shimmering is automatically animated to shift at this rate.

Atmosphere Amp: Default: 0, Range: 0 or greater.
Atmosphere gives the effect of rays shining through a dusty atmosphere and picking up light or getting shadowed. This parameter adjusts the amount, or amplitude, of the atmospheric effect. Zero gives smooth rays, higher values give more dusty look.

Atmosphere Freq: Default: 1, Range: 0.1 to 20.
Controls the spatial frequency of the atmospheric noise. Turn this up higher to get finer details, turn down for broader overall variation.

Atmosphere Detail: Default: 0.6, Range: 0 to 1.
Controls the amount of fine detail in the atmosphere simulation. Decrease to get smoother atmosphere, increase for a more crunchy or grainy look.

Atmosphere Speed: Default: 1, Range: any.
The cloudy noise in the atmosphere evolves over time like real dust clouds; this parameter controls how fast the cloud pattern changes over time. Set to zero for a static pattern.

Affect Alpha: Default: 0, Range: 0 or greater.
If this value is positive the output Alpha channel will include some opacity from the rays. The maximum of the red, green, and blue ray brightness is scaled by this value and combined with the background Alpha at each pixel.

Rays From Alpha: Default: 0, Range: 0 to 1.
Set to 1 to generate rays from the edges of the source's alpha channel instead of its RGB channels. This will typically reduce the rays generated from internal edges. Values between 0 and 1 interpolate between using the RGB and the Alpha.

Rays Under Source: Default: 0, Range: 0 to 1.
Set to 1 to composite the Source input over the rays.

Source Opacity: Default: 1, Range: 0 to 1.
Scales the opacity of the Source input when combined with the rays. This does not affect the generation of the rays themselves.

Bg Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the background before combining with the rays. This parameter only has an effect if the background input is provided.

Mask Type: Popup menu,  Default: Luma .
This setting is ignored unless the Mask input is provided.
Luma: uses the luminance of the Mask input to scale the brightness of the rays.
Color: uses the RGB channels of the Mask input to scale the colors of the rays.
Alpha: uses the alpha channel of the Mask input to scale the brightness of the rays.

Blur Mask: Default: 0, Range: 0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.

Invert Mask: Check-box,  Default: off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
See general info for: Apply To Title/Key , Crop/Transform , Resolution , Clamp Output To Legal , Bypass Effect , and Reset .


See Also:

Rays
Streaks
BlurMotion
WarpChroma
EdgeDetect
Glow
DissolveEdgeRays
Sapphire Plug-ins Introduction

PRODUCT UPDATES & SPECIAL OFFERS

Join our email newsletter and keep up to date