Sapphire Plug-ins for AVX2: Deband

S_Deband

Removes banding artifacts from a clip by diffusing pixels across the banded areas, while keeping the original edges intact. To use this effect, first select Show:Edges and adjust the edge threshold until the banding edges just disappear, leaving only the desired real edges. Then select Show:Result to see the result. If you still see some banding, increase Diffuse Threshold and/or Diffuse Radius.

In the Sapphire Blur+Sharpen category.


Inputs:

Source: The current track. The clip to be processed.

Background: Optional. The clip to use as background. The output of the effect is composited over this clip.

Mask: Optional. Interpolate between the result and the Source input. White areas use the result of the effect. Black areas use the Source clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Mocha: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.

Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.

Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.

Shift Mocha: X & Y,   Default: [0 0], Range: any.
Offsets the position of the Mocha Mask.

Bypass Mocha: Check-box,  Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.

Show Mocha Only: Check-box,  Default: off.
Bypass the effect and show the Mocha Mask itself.

Combine Masks: Popup menu,  Default: Union .
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
Union: Uses the area covered by both masks together.
Intersect: Uses the area that overlaps between the two masks.
Mocha Only: Ignore the Input Mask and only use the Mocha Mask.

Edge Threshold: Default: 2, Range: 0 to 255.
The amount by which adjacent pixels must differ to constitute a real desired edge. A value of 1.0 represents the smallest possible difference at 8 bits. This parameter should be set high enough that none of the bands appear as edges, but low enough that all the real edges are still detected.

Grow Edges: Default: 0, Range: 0 or greater.
Amount to grow the detected edges in approximate pixels. Increasing this parameter can prevent diffusion in areas that are near edges, but not on an edge.

Diffuse Threshold: Default: 1, Range: 0 or greater.
The maximum color difference allowed when diffusing pixels. This parameter is automatically scaled by the edge threshold. Increasing it can give better results when there is a gradient within the bands. Decreasing it will reduce diffusion in areas where there are no edges.

Diffuse Radius: Default: 12, Range: 0 or greater.
The maximum radius of pixel diffusion, in approximate pixels. A larger value will remove banding more effectively in large areas with uniform colors, while a smaller value will give a better result in areas with many small color regions.

Pre Blur: Default: 0, Range: 0 or greater.
Blurs the source before diffusing pixels.

Post Blur: Default: 0.5, Range: 0 or greater.
Blurs the result after diffusing pixels. Use this parameter to reduce noisiness in the result.

Show: Popup menu,  Default: Result .
Selects the type of output.
Result: Shows the final result.
Edges: Shows the edges of the image, where adjacent pixels differ by more than Edge Threshold. Use this mode to help fine-tune the edge detection parameters.

Mask Use: Popup menu,  Default: Luma .
Determines how the Mask input channels are used to make a monochrome mask.
Luma: the luminance of the RGB channels is used.
Alpha: only the Alpha channel is used, or if there is no valid Alpha channel the Red channel is used.

Blur Mask: Default: 0.05, Range: 0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.

Invert Mask: Check-box,  Default: off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
See general info for: Apply To Title/Key , Crop/Transform , Resolution , Clamp Output To Legal , Bypass Effect , and Reset .


See Also:

GrainRemove
Sapphire Plug-ins Introduction

PRODUCT UPDATES & SPECIAL OFFERS

Join our email newsletter and keep up to date