Sapphire Plug-ins for Autodesk: Crosshatch

Crosshatch

Simulates a pen-sketch crosshatched look using overlapping strokes. The source is divided into four bands based on luma; each band from dark to light gets a different pattern of strokes.

Inputs:

Source: The clip to be processed.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Effect: Popup menu,  Default: CrosshatchPencil .
Selects pencil or chalk modes.
CrosshatchPencil: Simulates dark pencil or pen strokes on white paper.
CrosshatchChalk: Simulates white chalk strokes on dark paper.

Stroke Frequency: Default: 100, Range: 1 to 500, Shared .
Increase for smaller, finer strokes; decrease for broader strokes.

Stroke Length: Default: 10, Range: 0.1 or greater, Shared .
Average length of the strokes, compared to their width.

Stroke Strength: Default: 0.55, Range: 0 to 1, Shared .
Overall size and strength; decrease for fewer, smaller strokes. At zero, strokes will vanish. Increase for bolder, more overlapping strokes. At one, there will be strokes everywhere, so you won't see the stroke pattern.

Stroke Softness: Default: 0.1, Range: 0.001 to 1, Shared .
Softness of the edges of each stroke. Decrease for hard-edged pen strokes; increase for a softer chalk-like look.

Stroke Angle: Default: 45, Range: any, Shared .
Angle of the strokes, in degrees; zero makes strokes horizontal and vertical.

Animate Speed: Default: 1, Range: 0 to 5, Shared .
Strokes normally change subtly over time; this controls the speed of that animation. Set to zero for static strokes that don't move.

Threshold Darks: Default: 0.15, Range: 0 to 1, Shared .
The darkest areas get double overlapping strokes (or pure black in chalk mode); source areas with luma darker than this threshold are considered in the darkest band and get those double strokes. Increasing this (or any threshold) will darken the overall result since more of the image will fall into the darkest band.

Threshold Mids: Default: 0.35, Range: 0 to 1, Shared .
Midtones are divided into darker-mids and brighter-mids; this threshold sets the luma value that separates those two bands. The darker mids get darker and denser strokes.

Threshold Brights: Default: 0.6, Range: 0 to 1, Shared .
The brightest areas get the lightest strokes (normally just white, unless you are in chalk mode); areas brighter than this threshold are considered brights.

Thresholds Add: Default: 0, Range: any, Shared .
This adds or subtracts from all the thresholds; increase to darken the overall result (because it raises the thresholds), decrease to lighten the overall result (because it lowers the thresholds).

Mix Threshold: Default: 0.005, Range: 0 to 0.1, Shared .
Softens the borders between the dark/mid/light luma bands.

Stroke Shift: X & Y,   Default: [0 0], Range: any, Shared .
Shift the overall stroke pattern; this can help match the stroke pattern to overall camera movement in the clip.

Strokes Use Source: Default: 0, Range: 0 to 1, Shared .
Increase to use more of the source color to color the strokes. Zero means use the stroke color; one means use the color of the underlying source clip. In between strokes, the background color shows through; if you have Back Style set to Source the strokes will disappear when this is set to one.

Stroke Color: Default rgb: [0 0 0].
The color to use for the strokes. In pencil mode this defaults to black; in chalk mode, it defaults to white.

Posterize Amount: Default: 0, Range: 0 to 1, Shared .
Posterizes the source, giving a more cartoony look with areas of solid color. This only has an effect when using the source to colorize the strokes or when using the source as the background.

Posterize Smooth: Default: 0, Range: 0 to 1, Shared .
When posterizing, smooth the edges of the solid-color areas. This avoids aliasing and usually looks better.

Posterize Phase: Default: 0, Range: any, Shared .
Adjusts the phase of the posterization. Use this to position the areas of flat color and avoid edges in the middle of areas you'd like to keep flat.

Mix With Source: Default: 0, Range: 0 to 1, Shared .
Interpolates between the result (when set to 0) and the original source (when set to 1). 0.7 can give a nice effect by blending some of the source in with the strokes.

Seed: Default: 0.123, Range: 0 or greater, Shared .
Initialize the random number generator for the strokes. Different values give different random stroke patterns.

Params2:

Edge Strength: Default: 0, Range: 0 or greater, Shared .
Adds cartoon-like edges to the look.

Edge Width: Default: 0.002, Range: 0 or greater, Shared .
Adjusts the width of the edge strokes; increasing this also softens the edges.

Edge Threshold: Default: 0.5, Range: 0 or greater, Shared .
Increase this to remove minor, insignificant edge strokes, giving a bolder look.

Suppress Sm Edg: Default: 0.5, Range: 0 or greater, Shared .
Increase to suppress small, minor edges.

Edge Sharpen: Default: 0, Range: 0 or greater, Shared .
Sharpens the edge strokes.

Scale Lights: Default: 1, Range: 0 or greater, Shared .
Scales the brightness of the result by this amount.

Offset Darks: Default: 0, Range: any, Shared .
Adds this gray value to the darker regions of the source. This can be negative to increase contrast.

Back Style: Popup menu,  Default: Solid Color .
What to use as the background, underneath the pen strokes.
Source: Use the source as the background. This gives a much more colorful look, as if the strokes are drawn over the original clip. You may want to adjust Stroke Color when using this.
Solid Color: Use the specified Solid Color background.

Solid Color: Default rgb: [1 1 1].
The color to use for the the background, when in Solid Color mode.

Edge Color: Default rgb: [0 0 0], Shared .
Sets the color for the edge strokes.

Pre Blur Bg: Default: 0, Range: 0 or greater, Shared .
Blur the source before using it as background, or to color the strokes. This can help reduce sparkling due to a noisy or grainy source.

Saturation: Default: 1, Range: 0 or greater, Shared .
Increase or decrease the overall saturation of the output.

Tint Lights: Default rgb: [1 1 1], Shared .
Scales the result by this color, thus tinting the lighter regions.

Tint Darks: Default rgb: [0 0 0], Shared .
Adds this color to the darker regions of the result.

Params3:

Mocha: Default: 0, Range: 0 or greater, Shared .
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater, Shared .
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1, Shared .
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off, Shared .
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Show Mocha Only: Check-box,  Default: off, Shared .
Bypass the effect and show the Mocha Mask itself.

Bypass Mocha: Check-box,  Default: off, Shared .
Ignore the Mocha Mask and apply the effect to the entire source clip.
See general info for: Res , On Fields , Redraw , Undo , Load Defaults , Crop , Add Noise , and Use Gamma .


See Also:

Sketch
VanGogh
HairyPaint
Pointalize
Cartoon
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash