Sapphire Plug-ins for Open Fx: Swish3D

S_Swish3D

Dissolves between two input clips while performing 3D moves on each. During the transition the From clip is transformed by the Zdist, Rotate, Swivel, Tilt, Shift, Scale, and Shear parameters, and the To clip is transformed by the opposite of these values. The overall amount of motion for each image can be scaled by the Rel Amp From and Rel Amp To parameters.

In the Sapphire Transitions effects submenu.


Inputs:

From: Optional. Starts the transition with this clip.

To: Optional. Ends the transition with this clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Effect: Popup menu,  Default: Blur Warp .
Selects the type of motion blur to apply when moving the From and To clips.
Blur Warp: Normal motion blur, similar to BlurMotion effect.
Chroma Warp: Move the color channels by different amounts, creating a color fringing effect similar to WarpChroma.

Wipe Amount: Default: 0, Range: -0.5 to 1.5.
Determines the transition ratio between the From and To inputs, and would normally be animated from 0 to 1 to perform a complete transition. The curve controlling this parameter can be adjusted for more detailed control over the timing of the wipe.

Center: X & Y,   Default: [0 0], Range: any.
The location of the d center in screen coordinates relative to the center of the frame. This parameter can be set by enabling and moving the Center Widget. Note that moving the d center can also cause the d size to change so that the current value of Wipe Amt remains correct.

Motion Blur: Default: 1, Range: 0 or greater.
Scales the amount of motion blur to use.

Z Dist: Default: 0.5, Range: 0.001 or greater.
The 'distance' to transform the From clip. Values greater than 1.0 move it farther away and make it smaller. Values less then 1.0 move the image closer and enlarge it. By default, the To clip is also transformed by the opposite of this value.

Rotate: Default: 0, Range: any.
Rotates by the specified angle in counter-clockwise degrees.

Swivel: Default: 0, Range: any.
Rotates left or right in 3D about a vertical axis.

Tilt: Default: 0, Range: any.
Rotates up or down in 3D about a horizontal axis. You can use Swivel and Tilt together to rotate about arbitrary diagonal axes.

Perspective Amount: Default: 1, Range: 0.25 to 4.
Controls the amount of lens telescoping while applying Swivel and Tilt. Increase for more 3D perspective.

Shift: X & Y,   Default: [0 0], Range: any.
Translation of the d pattern.

Scale: Default: 1, Range: 0 to 2.
Scales the size of the clips.

Scale Rel: X & Y,   Default: [1 1], Range: 0 to 2.
Scales the relative horizontal or vertical size of the clips.

Shear: X & Y,   Default: [0 0], Range: any.
Shears horizontally or vertically.

Rel Amp From: Default: 1, Range: any.
Scales the amount of transformation applied to the From clip. Set to zero to disable moving the From clip. Make negative to reverse the motion.

Rel Amp To: Default: -1, Range: any.
Scales the amount of transformation applied to the To clip. By default, the To clip is transformed in the opposite direction of the From clip. Set to zero to disable moving the To clip. Make positive to move the To clip in the same direction as the From clip.

Fade: Popup menu,  Default: From and To .
Determines which clips are faded in or out during the transition.
From and To: Cross fades both clips during the transition.
Only From: Fades out the From clip and composites that over the To clip. This causes the To clip to remain fully opaque in areas where the From clip does not overlap with it.
Only To: Fades in the To clip and composites that over the From clip. This causes the From clip to remain fully opaque in areas where the To clip does not overlap with it.

Fade Mid Time: Default: 0.5, Range: 0 to 1.
The midpoint in time of the image dissolve. Decrease for an earlier dissolve or increase for a later dissolve. If this is 1.0 the From clip will remain fully opaque for the entire transition. You can use this in combination with the Combine parameter to create various reveals without fading either clip. For example set Dissolve Mid Time to 1.0, Combine to Fade From, and then Shift and/or Rotate to cause the From clip to move off the screen.

Slow In: Default: 0.5, Range: 0 to 1.
If positive, causes the transition to start more gradually.

Slow Out: Default: 0.5, Range: 0 to 1.
If positive, causes the transition to end more gradually.

Wrap From: X & Y,  Popup menu,  Default: [ Reflect Reflect ].
Determines the method for accessing outside the borders of the From image.
No: gives black beyond the borders.
Tile: repeats a copy of the image.
Reflect: repeats a mirrored copy. Edges are often less visible with this method.

Wrap To: X & Y,  Popup menu,  Default: [ Reflect Reflect ].
Determines the method for accessing outside the borders of the To image.
No: gives black beyond the borders.
Tile: repeats a copy of the image.
Reflect: repeats a mirrored copy. Edges are often less visible with this method.

Filter: Check-box,  Default: on.
If enabled, the image is adaptively filtered when it is resampled. This gives better quality results when the image is warped smaller.

Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the result. This can be animated to brighten the result during the transition, but should typically start and end at 1.0 to avoid any pop at the start or end of the transition.

Mid Brightness: Default: 1, Range: 0 or greater.
Scales the brightness of the result at the middle of the transition by this amount. Automatically ramps to this brightness and then back again during the transition.

Steps: Integer,  Default: 8, Range: 3 to 100.
The number of spectrum samples to include along the path between the From (red) and To (blue) transformations. More steps give a smoother result, but require more time to process.

Color1: Default rgb: [1 0 0].
The color at the From transformation.

Color2: Default rgb: [0 1 0].
The color midway between the From and To transformations.

Color3: Default rgb: [0 0 1].
The color at the To transformation.

White Balance: Check-box,  Default: off.
When enabled, the three colors are adjusted internally so they sum to white. In this case, the colors of unwarped regions are not affected and the average color of the result remains the same.

Show To Shift: Check-box, Default: off.
Turns on or off the screen user interface for adjusting the Center parameter.

Show To Transform: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the To Z Dist and To Rotate parameters.

Show From Shift: Check-box, Default: off.
Turns on or off the screen user interface for adjusting the Center parameter.

Show From Transform: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Center parameter.

Show Center: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Center parameter.


See Also:

WipeLine
WipeCircle
WipeRectangle
WipeStar
WipeClock
WipeWedge
WipeDoubleWedge
WipeFourWedges
WipeDots
WipeChecker
WipeStripes
WipeRings
WipeBlobs
WipeCells
WipeTiles
WipePixelate
WipeDiffuse
WipeBubble
WipeClouds
WipeMoire
WipePlasma
WipePointalize
WipeWeave
WipeFlux
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash