Sapphire Plug-ins for Open Fx: Retime

S_Retime

Retimes a clip using optical flow based motion estimation and frame interpolation.

In the Sapphire Time effects submenu.


Inputs:

Source: The clip to be retimed.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Effect: Popup menu,  Default: Retime Speed .
How the clip is to be retimed.
Retime Speed: The output clip is to run at a specified fraction of the speed of the input clip.
Retime Longer: The output clip is to be a specified percentage longer than the input clip.
Retime Scale: The output clip is to be a specified percentage times the length of the input clip.
Retime FPS: The output clip speed is to be suitable for running at a specified frames-per-second given the input clip speed specified in frames-per-second.
Retime Length: Retimes a clip using optical flow motion estimation so that the output clip is a specified length (in frames).
Retime Variable Speed: Retimes a clip using optical flow motion estimation so that the input frame for every output frame may be controlled with a key-framed parameter. This allows vari-speed effects, backwards motion and so forth.

Speed: Default: 0.5, Range: 0.01 to 10.
Used in Speed mode. The output clip runs at a speed which is this times the speed of the input clip. For example, 0.2 would make the output 5 times slower than the input.

Percent Longer: Default: 100, Range: 0 to 1e+04.
Used in Longer mode. How many percent longer the output is to be relative to the input. 0 percent makes the output the same length as the input. 100 percent would make the output twice as long as the input.

Percent: Default: 200, Range: 1 to 1e+04.
Used in Scale mode. How long the output clip is to be as a percentage of the input clip length. 100 percent makes the output the same length as the input. 200 percent would make the output twice as long as the input. 50 percent would make the output half as long as the input.

Input Fps: Default: 30, Range: 1 to 1000.
Used in FPS mode. The frame rate of the input clip.

Output Fps: Default: 60, Range: 1 to 1000.
Used in FPS mode. The frame rate of the output clip. If this is greater than the Input Fps parameter, the output clip will be longer than the input clip. If this is less than the Input Fps parameter, the output clip will be shorter than the input clip. If the output clip is played at the specified output frames-per-second, it will last as long (in seconds) as the input clip.

Output Length: Integer,  Default: 30, Range: 2 to 1e+04.
Used in Length mode. The desired length of the output clip in frames.

Input Frame: Default: 1, Range: 0 to 1e+04.
Used in Curve mode. The input frame to output. This parameter should normally be key-framed, with the frame for which a key-frame is set designating an output frame, and the value set at that key-frame denoting the desired input frame at that output frame.

Result: Popup menu,  Default: Result .
Output the retimed clip or a representation of the motion vectors.
Result: Output the retimed clip.
Flow Vectors: Output a representation of the motion vectors. The direction of the vector at a pixel is shown as a color, and the length of the vector as the saturation of that color.

Start Frame: Integer,  Default: 0, Range: 0 or greater.
Frame number of the first frame in the clip.

Motion Blur: Default: 0, Range: 0 to 2.
If greater than 0.0, blur along this fraction of the length of the motion vectors.

Flow Field Smoothness: Default: 0.8, Range: 0 or greater.
Optical flow parameter: The relative importance of adhering to the image data relative to the importance of keeping a smooth flow field. The higher this value, the more relative importance is assigned to the flow field smoothness.

Emphasize Edges: Default: 0, Range: 0 to 1.
Optical flow parameter: Specify the degree of structure/texture decomposition to apply to the input clip prior to solving for the motion vector field. This can be useful to reduce problems due to lighting changes and may give better localised flows and other improvements. It is not recommended when there is fast motion in the input clip. However, in some cases, it can be very helpful in getting acceptable results. Suggested usage is to first try a value of 0.0 (which turns off structure/texture decomposition). If the result is unsatisfactory, try 0.4. Finally, try 1.0.

Flow View Scale: Default: 0.9, Range: 0 or greater.
When outputting a representation of the motion vectors, this increases the saturation of the color corresponding to a unit length motion. This makes the representation more sensitive to show shorter vectors more clearly.

Crop Input Parameters: Default: 0, Range: 0 or greater.
These 4 parameters, Crop Top , Crop Bottom , Crop Left, and Crop Right , allow selecting a rectangular subsection of the input image to be processed. This can avoid artifacts due to pulling in black at the edges. This can happen when a lower resolution element is retimed in a higher resolution project.


See Also:

Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash