Sapphire Plug-ins for Open Fx: DissolveRays

S_DissolveRays

Transitions between two input clips using animated rays. The clips dissolve into each other, and rays are added to the result. The rays ramp up and down over the duration of the effect. The rays animate by moving the origin of the rays across the screen along a line. The Dissolve Amount parameter should be animated to control the transition speed.

In the Sapphire Transitions effects submenu.


Inputs:

From: Optional. Starts the transition with this clip.

To: Optional. Ends the transition with this clip.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Effect: Popup menu,  Default: Light Rays .
Selects between light and dark rays.
Light Rays: Generates beams of light emitting from the bright areas of the source.
Dark Rays: Generates beams of darkness emitting from the dark areas of the source.

Dissolve Amount: Default: 0, Range: -0.5 to 1.5.
The transition ratio between the From and To inputs. A value of 0 gives only the From input and a value of 1 gives only the To input. By default this parameter automatically animates from 0 to 1 to perform a complete transition.

Dissolve Speed: Default: 3, Range: 1 or greater.
The speed of the dissolve between the From and To clips. When set to 1, the dissolve takes place over the entire duration of the effect. When set higher, the dissolve is shorter, although the edge rays ramp-up and ramp-down still takes the entire duration. Setting this to 10 can make the transition snappier and more like a flash-frame cut.

Rays Center: X & Y,   Default: [0 0], Range: any.
The location from which the rays beam outwards at the midpoint of the transition.

Rays Center Speed: Default: 0.2, Range: 0 to 2.
The speed at which the rays center moves across the screen.

Rays Center Angle: Default: 0, Range: any.
The angle at which the rays center moves across the screen.

Rays Length: Default: 0.75, Range: 2 or less.
The maximum length of the rays at the midpoint of the transition.

Length Red: Default: 1, Range: 0 or greater.
The relative length of the red channel of the rays. Adjust this, along with Length Green and Length Blue, to create color fringing effects.

Length Green: Default: 1, Range: 0 or greater.
The relative length of the green channel of the rays.

Length Blue: Default: 1, Range: 0 or greater.
The relative length of the blue channel of the rays.

Reverse Rays: Default: 0, Range: 0 or greater.
Extend rays inward as well as outward. The length of the reversed rays is controlled by Rays Length as well as this parameter.

Rays Shrink: Default: 0, Range: 0 to 1.
The fraction by which the length of the rays is reduced at the beginning and end of the transition.

Rays Brightness: Default: 8, Range: 0 or greater.
The maximum brightness of the rays at the midpoint of the transition.

Rays Darkness: Default: 8, Range: 0 or greater.
Scales the intensity of the dark ray beams.

Rays Fade: Default: 1, Range: 0 to 1.
The fraction by which the rays brightness is reduced at the beginning and end of the transition.

Blur Rays: Default: 0, Range: 0 or greater.
Blur the rays only, before applied to the Source image.

Blur Rays Rel: X & Y,   Default: [1 1], Range: 0 or greater.
The relative horizontal and vertical blur widths applied to the rays. Set Blur Rays Rel X to 0 for a vertical-only blur, or set Blur Rays Rel Y to 0 for a horizontal-only blur.

Rays Color: Default rgb: [1 1 1].
Scales the color of the ray beams.

Rays Color Dark: Default rgb: [0 0 0].
Scales the color of the dark ray beams.

Bias Outer Bright: Default: 0, Range: 0 to 1.
Determines the variable amount of brightness along the rays. This is normally near 0 so the rays fade away at their outer ends, 0.5 causes equal brightness along the rays, and 1.0 causes maximum brightness at the ends.

Rays Res: Popup menu,  Default: Full .
Selects the resolution factor for the rays. Higher resolutions give sharper rays, lower resolutions give smoother rays and faster processing. This 'Res' factor only affects the rays: the background is still combined with the rays at full resolution.
Full: Full resolution is used.
Half: The rays are calculated at half resolution.
Quarter: The rays are calculated at quarter resolution.

Threshold: Default: 0.5, Range: 0 or greater.
Dissolve are generated from locations in the source clip that are brighter than this value. A value of 0.9 causes dissolve at only the brightest spots. A value of 0 causes dissolve for every non-black area.

Threshold Add Color: Default rgb: [0 0 0].
This can be used to raise the threshold on a specific color and thereby reduce the dissolve generated on areas of the source clip containing that color.

Shimmer Amp: Default: 0.5, Range: 0 or greater.
Modulates the ray source image with this amount of noise texture to give the rays a shimmering look.

Shimmer Freq: Default: 40, Range: 0.1 or greater.
The frequency of the shimmer texture. Increase for a finer grained shimmer effect, decrease for larger, softer shimmer. This has no effect unless Shimmer Amp is positive.

Shimmer Seed: Default: 0.123, Range: 0 or greater.
Used to initialize the random number generator for the shimmer texture. The actual seed value is not significant, but different seeds give different results and the same value should give a repeatable result.

Shimmer Shift: X & Y,   Default: [0 0], Range: any.
Translation of the shimmer texture. This has no effect unless Shimmer Amp is positive.

Shimmer Speed: X & Y,   Default: [0 0], Range: any.
Translation speed of the shimmer texture. If non-zero, the shimmering is automatically animated to shift at this rate.

Atmosphere Amp: Default: 0, Range: 0 or greater.
Atmosphere gives the effect of rays shining through a dusty atmosphere and picking up light or getting shadowed. This parameter adjusts the amount, or amplitude, of the atmospheric effect. Zero gives smooth rays, higher values give more dusty look.

Atmosphere Freq: Default: 1, Range: 0.1 to 20.
Controls the spatial frequency of the atmospheric noise. Turn this up higher to get finer details, turn down for broader overall variation.

Atmosphere Detail: Default: 0.6, Range: 0 to 1.
Controls the amount of fine detail in the atmosphere simulation. Decrease to get smoother atmosphere, increase for a more crunchy or grainy look.

Atmosphere Speed: Default: 1, Range: any.
The cloudy noise in the atmosphere evolves over time like real dust clouds; this parameter controls how fast the cloud pattern changes over time. Set to zero for a static pattern.

Affect Alpha: Default: 0, Range: 0 or greater.
If this value is positive the output Alpha channel will include some opacity from the rays. The maximum of the red, green, and blue ray brightness is scaled by this value and combined with the background Alpha at each pixel.

Rays From Alpha: Default: 0, Range: 0 to 1.
Set to 1 to generate rays from the edges of the source's alpha channel instead of its RGB channels. This will typically reduce the rays generated from internal edges. Values between 0 and 1 interpolate between using the RGB and the Alpha.

Source Opacity: Default: 1, Range: 0 to 1.
Scales the opacity of the Source input when combined with the rays. This does not affect the generation of the rays themselves.

Use Source Chroma: Default: 1, Range: 0 or greater.
If this is 1, the chroma of the Source input affects the chroma of the resulting rays. If it is 0, only the brightness of the Source input affects the brightness of the rays, and the rendering speed should also be faster. Values between 0 and 1 interpolate between these two options.

Show Rays Center: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Rays Center parameter.

Show Rays Center Angle: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Rays Center parameter.


See Also:

DissolveBlur
DissolveBubble
DissolveDiffuse
DissolveFilm
DissolveGlow
DissolveLuma
DissolvePuddle
DissolveSpeckle
DissolveStatic
DissolveVortex
DissolveWaves
Rays
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash