S_GlowRingsGenerates glows of colored rings around the areas of the source clip that are brighter than the given threshold. Raise the threshold parameter to produce glows in fewer areas. Adjust the Width and Thickness RGB parameters to make glows with different color patterns, and adjust the Width XY parameters to make horizontal or vertical glows.In the Sapphire Lighting category.
Inputs:
|
|
Parameters:
-
Load Preset:
Push-button
.
Brings up the Preset Browser to browse all available presets for this effect.
-
Save Preset:
Push-button
.
Brings up the Preset Save dialog to save a preset for this effect.
-
Mocha:
Default:
0,
Range:
0 or greater.
Brings up the Mocha window for tracking footage and generating masks.
-
Blur Mocha:
Default:
0,
Range:
any.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.
-
Mocha Opacity:
Default:
1,
Range:
0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.
-
Invert Mocha:
Check-box, Default:
off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.
-
Resize Mocha:
Default:
1,
Range:
0 to 2.
Scales the Mocha Mask. 1.0 is the original size.
-
Resize Rel X:
Default:
1,
Range:
0 to 2.
The relative horizontal size of the Mocha Mask.
-
Resize Rel Y:
Default:
1,
Range:
0 to 2.
The relative vertical size of the Mocha Mask.
-
Shift Mocha:
X & Y, Default:
screen center.
Offsets the position of the Mocha Mask.
-
Bypass Mocha:
Check-box, Default:
off.
Ignore the Mocha Mask and apply the effect to the entire source clip.
-
Show Mocha Only:
Check-box, Default:
off.
Bypass the effect and show the Mocha Mask itself.
-
Combine Masks:
Popup menu, Default: Union
.
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
-
Union:
Uses the area covered by both masks together.
- Intersect: Uses the area that overlaps between the two masks.
- Mocha Only: Ignore the Input Mask and only use the Mocha Mask.
- Intersect: Uses the area that overlaps between the two masks.
-
Union:
Uses the area covered by both masks together.
-
Brightness:
Default:
1,
Range:
0 or greater.
Scales the brightness of all the glows.
-
Color:
Default rgb:
[1 1 1].
Scales the color of the glows. The colors and brightnesses of the glows are also affected by the Source input.
-
Threshold:
Default:
0,
Range:
0 or greater.
Glows are generated from locations in the source clip that are brighter than this value. A value of 0.9 causes glows at only the brightest spots. A value of 0 causes glows for every non-black area.
-
Threshold Add Color:
Default rgb:
[0 0 0].
This can be used to raise the threshold on a specific color and thereby reduce the glows generated on areas of the source clip containing that color.
-
Glow Width:
Default:
0.3,
Range:
any.
Scales the glow distance. This and all the width parameters can be adjusted using the Width Widget. Note that a zero glow width still enhances the bright areas; set the brightness parameter to zero if you want to pass the Source through unchanged.
-
Width X:
Default:
1,
Range:
0 or greater.
Scales the horizontal glow width. Set to 0 for vertical only.
-
Width Y:
Default:
1,
Range:
0 or greater.
Scales the vertical glow width. Set to 0 for horizontal only.
-
Width Red:
Default:
0.5,
Range:
0 or greater.
Scales the red glow width. If the red, green, and blue widths are equal, the glows will match the color of the source clip. If they are not equal, the glows will vary in color with distance.
-
Width Green:
Default:
0.75,
Range:
0 or greater.
Scales the green glow width.
-
Width Blue:
Default:
1,
Range:
0 or greater.
Scales the blue glow width.
-
Thickness Red:
Default:
0.5,
Range:
0 to 1.
Scales the thickness of the red region.
-
Thickness Green:
Default:
0.5,
Range:
0 to 1.
Scales the thickness of the green region.
-
Thickness Blue:
Default:
0.5,
Range:
0 to 1.
Scales the thickness of the blue region.
-
Affect Alpha:
Default:
0,
Range:
0 or greater.
If this value is positive the output Alpha channel will include some opacity from the glows. The maximum of the red, green, and blue glow brightness is scaled by this value and combined with the background Alpha at each pixel.
-
Glow From Alpha:
Default:
0,
Range:
0 to 1.
Set to 1 to generate glows from the alpha channel of the source input instead of the RGB channels. In this case the glows will not pick up color from the source and will typically be brighter. Values between 0 and 1 interpolate between using the RGB and the Alpha.
-
Glow Under Source:
Default:
0,
Range:
0 to 1.
Set to 1 to composite the Source input over the glows.
-
Light Background:
Default:
0,
Range:
0 to 1.
Increase this to give a look of the glow casting light onto the background image. To see this more clearly you can also lower the Scale Background parameter or raise the Brightness parameter.
-
Source Opacity:
Default:
1,
Range:
0 to 1.
Scales the opacity of the Source input when combined with the glows. This does not affect the generation of the glows themselves.
-
Bg Brightness:
Default:
1,
Range:
0 or greater.
Scales the brightness of the background. This parameter only has an effect if the background input is provided, and is visible due to a partially transparent Source image or a reduced Source Opacity parameter value.
-
Show:
Popup menu, Default: Result
.
Selects the type of output
-
Result:
Shows the final result of combining the glow, source, and background.
- Threshold: Shows the thresholded image that is used to generate the glow.
- Threshold: Shows the thresholded image that is used to generate the glow.
-
Result:
Shows the final result of combining the glow, source, and background.
-
Combine:
Popup menu, Default: Screen
.
Determines how the glow is combined with the Source or Background. This parameter has no effect if Light BG is set to 1.
-
Mult:
the source or background is multiplied by the glow.
- Add: the glow is added to the source or background.
- Screen: the glow is blended with the source or background using a screen operation.
- Difference: the result is the difference between the glow and the source or background.
- Overlay: the glow is combined with the source or background using an overlay function.
- Add: the glow is added to the source or background.
-
Mult:
the source or background is multiplied by the glow.
-
Subpixel:
Check-box, Default:
on.
Enables glowing by subpixel widths. Use this for smoother animation of the Width parameters.
-
Invert Mask:
Check-box, Default:
off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
See Also:
-
Glow
GlowDist
GlowRainbow
GlowAura
GlowDarks
GlowOrthicon
GlowEdges
GlowNoise
Glint
Sapphire Plug-ins Introduction